|
Dynalock PAL 1200 Lockset
Programmable features include 64 to 512 multi-level user codes with a 64 to 2208
event audit trail
Dynalock 1300 Series Mortise Electric Deadbolt Lock
Compact design allows for installation where most deadbolt locks cannot be
mounted
1 6 0 0 DynaLock Series Electric Strikes
Universally adaptable to suit all door and
frame types and accommodate most locking
devices with up to a 3/4” latch projection
Dynalock Series 2000
Each 2000 Series Electromagnetic Lock is comprised of 3 basic components: a lock
housing, an electromagnetic coil and an armature
Series 2013
Electromagnetic Gate Lock
1200 LBS Holding force for slide or swing installation
Series 2268
Electromagnetic Lock
Classic Low Profile 1200 lb. holding force
Series 2800
Electromagnetic Door Holders designed to hold self-closing fire or smoke barrier
doors open until automatically released by fire alarm, smoke detection or
sprinkler systems
Model 2801
Floor Mount/Single Door
Holding force:
25 Lbs. (11.3 Kg.) Operating Voltages: 24VDC, 24VAC or 120VAC/60Hz Current Draw:
0.015 Amps Continuous (All Voltages)
Model 2802
Floor Mount/Double Door
Holding Force:
25 Lbs. (11.3 Kg.) Per Door Operating Voltages: 24VDC, 24VAC or 120VAC/60Hz
Current Draw: 0.030 Amps Continuous (All Voltages)
Model 2803
Flush Wall Mount/Extended Armature
Holding Force:
25 Lbs. (11.3 Kg.) Operating Voltages: 24VDC, 24VAC or 120VAC/60Hz Current Draw:
0.015 Amps Continuous (All Voltages)
Model 2804
Flush Wall Mount/Standard Armature
Holding Force:
25 Lbs. (11.3 Kg.) Operating Voltages: 24VDC, 24VAC or 120VAC/60Hz Current Draw:
0.015 Amps Continuous (All Voltages)
Models 2853/2855
Adjustable Armature Extension Rods
Extension Rods are designed to extend the armature up to 12”, where a wide
standoff distance between the electromagnet and armature mounting locations
exists
Model 2853 is adjustable from 5.33” to 7.55” overall extension
Model 2855 is adjustable from 7.55” to 12” overall extension
Dynalock Series 3000 Electromagnetic Lock
Each 3000 Series Electromagnetic Lock is comprised of 3 basic components: a lock
housing, an electromagnetic coil, and an armature
Series 3006 2 Wire Control
Free Egress Electromagnetic Lock
1500 Lb. Holding Force Electromagnetic Locks For Life Safety, and High Security
SERIES 3000
3101B Series Delay Egress System
1500 lb. Holding Force
Dynalock 400 Series Locks and Brackets
4011 Thru 4442 Series
Filler Plate for
Full Size Single and
Double Mag Locks
4511 Thru 4725 Series
Angle Brackets for
Full Size Single and
Double Mag Locks
4010 Thru 4486 Series
Filler Plate for
Mini Size Single and
Double Mag Locks
4510 Thru 4785 Series
Angle Brackets for
Mini Size Single and
Double Mag Locks
Dynalock 5000 Series Power Supplies
Power Supply 5025 Series
1 AMP at 12 VDC or 24 VDC
Power Supply 5500 Series
3 AMPS at 12 VDC - 2 AMPS at 24 VDC
Series 5500 Medium Duty
Power Supply 5600 Series
10 AMPS AT 12 VDC - 5 AMPS AT 24 VDC
Series 5600 Heavy Duty
5200 Series Open Transformer
2 AMP OUTPUT
at 12 or 24 Volts
5300 Series Plug-in Transformer
3 AMP output at 12 VOLT
1.5 AMP output at 24 VOLT
5400 Series Power Supply with Battery Back-up
Dynalock Egress Controls
6335 Series Concealed Exit Control
The #6335 surface mounted concealed exit control offers a convenient method of
controlling the locked/unlocked status of a door opening that has an
electromagnetic lock, deadbolt lock or electric strike installed
Series 6451 Exit Sensor Bar
Releases an electric lock when activated by any means including touch, shopping
carts, gurneys, wheelchairs, or any other ADA Device
Dynalock 7000 Series Key Switches
7075 Emergency Break Glass Lock Release
7075 Break Glass assembly is a preferred method of releasing non-designated
egress doors in an emergency situation since it requires more of a commitment on
the users part than simply pulling a conventional handle
7076 Break Glass with LED, Specify 12 or 24V
7077 Glass with Audible, 6-28V
7078 Contact block NO/NC #7079 Lenses - 5 pack - Spare
Series 6450 Exit Sensor Bar
Releases an electric lock when activated by any means including touch, shopping
carts, gurneys, wheelchairs, or any other ADA Device
Dynalock 7000 Series Key Switches
Key switches are specified where a high degree of control is desired with regard
to who may access a secured entrance or other electrically controlled equipment
7075 Emergency Glass Break release
7075 Break Glass assembly is a preferred method of releasing non-designated
egress doors in an emergency situation since it requires more of a commitment on
the users part than simply pulling a conventional handle
7076 Break Glass with LED, Specify 12 or 24V
7077 Glass with Audible, 6-28V
7078 Contact block NO/NC 7079 Lenses - 5 pack - Spare
Dynalock 7200 Series
Narrow Weather Proof - Vandal Resistant Digital Entry Keypad with up to 120 user
codes
The sleek #7200 narrow design digital keypad represents the most technologically
advanced system of this type in the industry
Dynalock 8000 SF Series Slope Front Standard Consoles
Dynalock 8000 SF Series Consoles are designed to control and monitor most any
type electric lock and may be ordered with up to 12 stations
Dynalock 9200 Series Door Status Switches
9200 Surface Mount
Assembly provides a means of low cost door position reporting when concealment
isn't possible or not important
9250 Mortise Mount
9250 Mortise Mounted Door Status Switch Assembly provides a means of concealed
door position reporting
9275 SPDT-9280 Ball Type Mortise Mount
9275 and 9280 Mortise Mount Ball type door status switch assembly is recommended
when mortise mounting
|
