Amseco Fire Products
Speakers
FH-47
Low Profile Fire Alarm Speakers
Available 25V rams and 70.7V rmas models
¼, ½, 1, 2 Watt Tap
Square Grill and Round Grill
FH-45
High Wattage Fire Alarm Speakers
Available 25V rams and 70.7V rmas models
2, 4, 8 Watt Tap
Square Grill and Round Grill
Speaker Strobe Combonation
SFH47-153075
Low Profile Speaker/Select-A-Strobe Combination
Available 25V rms and 70.7V rms models
15 or 30 Selectable candela
¼, ½, 1, 2 Watt Tap
Square Grill and Round Grill
SFH47-75110
Low Profile Speaker/Select-A-Strobe Combination
Available 25V rms and 70.7V rms models
75 or 110 Selectable Candela
¼, ½, 1, 2 Watt Tap
Square Grill and Round Grill
SFH45-153075
High Wattage Fire Alarm Speaker/Select-A-Strobe Combination
Available 25V rms and 70.7V rms models
15 or 30 Selectable Candela
2, 4, 8 Watt Tap
Square Grill and Round Grill
SFH45-75110
High Wattage Fire Alarm Speaker/Select-A-Strobe Combination
Available 25V rms and 70.7V rms models
75 or 110 Selectable Candela
2, 4, 8 Watt Tap
Square Grill and Round Grill
SSC25-3075110
Select-A-Speaker/Strobe Combination
25V
30, 75, 110 Selectable Candela
¼, ½, 1, 2 Watt Tap
SSC70-3075110
Select-A-Speaker/Strobe Combination
70.7V
30, 75, 110 Candela
¼, ½, 1, 2 Watt Tap
SSC25-177
Select-A-Speaker/Strobe Combination
25V
177 Candela
¼, ½, 1, 2 Watt Tap
SSC70-177
Select-A-Speaker/Strobe Combination
70.7V
177 Candela
¼, ½, 1, 2 Watt Ta
Horns
H24W Select-A-Horn Series
Electronic Horn
24 V DC
4 Wire Compatible
HW-24 Select-A-Horn Series
Electronic Horn
24 V DC
HP-24 / HP-24T
Piezo Alert Mini Horn (Single Tone)
Terminals
Mini Horn
Single Tone
HP-25T / HP-26
Temporal Sound Mini Horn (Dual Tone)
Terminal 2-tone
Mini Horn
Dual Tone
24V DC(HP-25T) and 120V AC(HP-26)
FS2-1
Slow Whoop Sounder
Surface or Recessed mount
12 or 24 V DC
BZ-54VT
Motor Driven Horn
Operates on 12/24 V DC
Surface or Recessed mount
indoor/outdoor
Strobes
SLW24-153075
Select-A-Strobe Series
24V DC
15/75 or 30/120 Selectable Candela
Wall Mount Only
SL24W-153075
Select-A-Strobe Series
24V DC
75 or 110 Selectable Candela
Wall Mount Only (Universal Mounting Plate)
SL24W-75110
Select-A-Strobe Series
24V DC
75 or 110 Selectable Candela
Wall Mount Only (Universal Mounting Plate)
SL24C-3075110
Select-A-Horn/Strobe Combination
24V DC
30, 75, 110 Selectable Candela
Ceiling or Wall Mount
SL24C-177
Select-A-Horn/Strobe Combination
24V DC
177 Selectable Candela
Ceiling or Wall Mount
SAD24-153075
Stand Alone Strobe
24 V DC
15/75 or 30/120 Selectable Candela
Wall Mount or Ceiling Mount
SAD24-75110
Stand Alone Strobe
24 V DC
75 or 110 Selectable Candela
Wall Mount or Ceiling Mount
SAD-12L
Stand Alone Strobe
12V DC
15 or 75 Selectable Candela
SAD-24L
Stand Alone Strobe
24V DC
15 or 75 Selectable Candela
RSD24-153075
Retrofit Strobe
24 V DC
15/75 or 30/120 Selectable Candela
Wall Mount or Ceiling Mount
RSD24-75110
Retrofit Strobe
24 V DC
75 or 110 Selectable Candela
Wall Mount or Ceiling Mount
SLB24-75
Outdoor Strobe
24 V DC
75 Candela
Red or Gray body
Available in Clear lens
SLB120-75
Outdoor Strobe
120 V AC
75 Candela
Red or Gray body
Available in Clear lens
RSD-12L
Retrofit Strobe
12V DC
15 or 75 Selectable Candela
RSD-24L
Retrofit Strobe
24V DC
15 or 75 Selectable Candela
RSD-24M
Retrofit Strobe
24V DC
110 Selectable Candela
SL-5(12&24)
Conical Strobe Lights
160,000 Candle Power
Operates on 12/24 V DC
SLL-G
Conical Strobe Lights for SL-5
Lens Only
Horn and Strobe
SH24W-153075
Select-A-Horn/Strobe Combination
24V DC
15/75 or 30/120 Selectable Candela
Wall Mount Only
SH24W-75110
Select-A-Horn/Strobe Combination
24V DC
75 or 110 Selectable Candela
Wall Mount Only
SHW24-153075
Select-A-Horn/Strobe Combination
24V DC
15/75 or 30/120 Selectable Candela
Wall Mount Only
SH24C-3075110
Select-A-Horn/Strobe Combination
24V DC
30, 75, 110 Selectable Candela
Ceiling or Wall Mount
SH24C-177
Select-A-Horn/Strobe Combination
24V DC
177 Selectable Candela
Ceiling or Wall Mount
SHP24-153075
Mini Horn/Select-A-Strobe Combination
24V DC
15, 30 Selectable Candela
Strobe/Piezo
SHP24-75110
Mini Horn/Select-A-Strobe Combination
24V DC
75, 110 Selectable Candela
Strobe/Piezo Sounder
SHB24-75
Outdoor Horn/Strobe Combination
24V DC
75 Candela
Available in Clear lens
SHB120-75
Outdoor Horn/Strobe Combination
120V AC
75 Candela
Available in Clear lens
SZ5424-153075
Motor Driven Horn Horn/Select-A-Strobe Combination
24V DC
15, 30 Selectable Candela
12V DC or 24V DC
SZ5424-75110
Motor Driven Horn Horn/Select-A-Strobe Combination
24V DC
75, 110 Selectable Candela
Chimes
CM24W
Chime Series
24V DC
Wall Mount
CM24C Chime Series
24V DC
Electronic Chime
Chime / Strobes
SCM24W-153075
Chime/Select-A-Strobe
24V DC
15, 30 Selectable Candela
SCM24W-75110
Chime/Select-A-Strobe
24V DC
75, 110 Selectable Candela
SCM24C-3075110
Chime/Select-A-Strobe
24V DC
30, 75, 110 Selectable Candela
Ceiling Mount Only
SCM24C-177
Chime/Select-A-Strobe
24V DC
177 Selectable Candela
Ceiling Mount Only
Sync / Modules
SMS1-3A
Sync Module
Single Zone
SMD10-3A
Sync Module Feed Thru
Dual Zone
Daisy Chain
Compatible with all the AMSECO signaling devices
TMP1-3A
Temporal Pattern Module
24V DC
Designed to work with bells, electronic sounders with steady sound output
TMPM-3A
Input Temporal Pattern Module
24V DC or 120V AC
Designed to work with bells, electronic sounders with steady sound output
RBX-1
Round Back Box Skirt
Surface mount skirt for Ceiling/Wall mount
Fits all 4" square, single gang, double gang, and octagon back boxes
SPC-1
Universal Retrofit Metal Plate
Designed for retrofit applications when using 4" square, single, double
gang, and octagon back
SSAP-1
Universal Mounting Plate
Adapt-A-Plate
Designed for SFH45 and SFH47 Series
SBX-1
Back Box for Outdoor Strobe, Horn/Strobe, SLB and SHB Series
Available in Red or Gray
SBP-1
SLB and SHB Strobe Surface Mounting Plate
Plate mounts to 4" square box or single gang box
Available in Red or Gray
SP-SL1A
Semi-Flush Plate for SL-5 Strobe
SP-SL1B
Surface Mount Plate for SL-401 and SL-5 Strobe
BBX-1
Deep, Weather Proof Back Box with Gasket
Gasket included
Tapped for ½" conduit
Available in Red
BBX-4 Shallow, Weather Proof Back Box with Gasket
Gasket included
Tapped for ½" conduit
Available in Red
SP-3B
Semi-Flush Plate for SL-5 Strobe and BZ-51 Horn
Plate mounts to 4" square box
SP-SL3
Surface Plate for SL-3 Strobe
Plate mounts to 4" square box
FP-MSFR
Adapter Plate for Fire Bells
Universal Mounting Options
Mounts to Single, Double gang, and 4" square box
SP-54R
Adapter Plate for BZ-54 Horn
Plate mounts to 4" square box
SP-115
Universal Plate
Designed to used with bells, strobes, electronic sounders and combination
4SP-M
Multiple Mounting Plastic Plate
Designed to be used with horns and strobes
Available in Red and White
4BX-1
Surface Back Box for FH47 Series
4" electrical back box
Metal washer reinforcement
Mounts over single gang
4BX-3
Surface Back Box for FH45 Series
4" electrical back box
Metal washer reinforcement
Mounts over single
BBF
Flush Mount Back Box for Fire Horn BZ-54
Designed to be used with BZ-54 Fire Horn
4 knock outs
Amseco Accessories
RBX-1
Round Back Box Skirt
Surface mount skirt for Ceiling/Wall mount
Fits all 4" square, single gang, double gang, and octagon back boxes
SPC-1
Universal Retrofit Metal Plate
Designed for retrofit applications when using 4" square, single, double gang,
and octagon back
SSAP-1
Universal Mounting Plate
Adapt-A-Plate
Designed for SFH45 and SFH47 Series
SBX-1
Back Box for Outdoor Strobe, Horn/Strobe, SLB and SHB Series
Available in Red or Gray
SBP-1
SLB and SHB Strobe Surface Mounting Plate
Plate mounts to 4" square box or single gang box
Available in Red or Gray
SP-SL1A
Semi-Flush Plate for SL-5 Strobe
SP-SL1B
Surface Mount Plate for SL-401 and SL-5 Strobe
BBX-1
Deep, Weather Proof Back Box with Gasket
Gasket included
Tapped for ½" conduit
Available in Red
BBX-4
Shallow, Weather Proof Back Box with Gasket
Gasket included
Tapped for ½" conduit
Available in Red
SP-3B
Semi-Flush Plate for SL-5 Strobe and BZ-51 Horn
Plate mounts to 4" square box
SP-SL3
Surface Plate for SL-3 Strobe
Plate mounts to 4" square box
FP-MSFR
Adapter Plate for Fire Bells
Universal Mounting Options
Mounts to Single, Double gang, and 4" square box
SP-54R
Adapter Plate for BZ-54 Horn
Plate mounts to 4" square box
SP-115
Universal Plate
Designed to used with bells, strobes, electronic sounders and combination
4SP-M
Multiple Mounting Plastic Plate
Designed to be used with horns and strobes
Available in Red and White
4BX-1
Surface Back Box for FH47 Series
4" electrical back box
Metal washer reinforcement
Mounts over single gang
4BX-3
Surface Back Box for FH45 Series
4" electrical back box
Metal washer reinforcement
Mounts over single
BBF
Flush Mount Back Box for Fire Horn BZ-54
Designed to be used with BZ-54 Fire Horn
4 knock outs
Amseco Fire and Burglar Alarm Bells
Bells
MBA-6-12
MBA Series Indoor/Outdoor Fire Alarm DC Motor Driven Bells
12V DC
6" Gong
MBA-8-12
MBA Series Indoor/Outdoor Fire Alarm DC Motor Driven Bells
12V DC
8" Gong
MBA-10-12
MBA Series Indoor/Outdoor Fire Alarm DC Motor Driven Bells
12V DC
10" Gong
MBA-6-24
MBA Series Indoor/Outdoor Fire Alarm DC Motor Driven Bells
24V DC
6" Gong
MBA-8-24
MBA Series Indoor/Outdoor Fire Alarm DC Motor Driven Bells
24V DC
8" Gong
MBA-10-24
MBA Series Indoor/Outdoor Fire Alarm DC Motor Driven Bells
24V DC
10" Gong
PBA-6-24 PBA Series Vibratory Indoor /Outdoor AC Driven Fire Alarm Bells
24V AC
6" Gong
Terminal Type
PBA-8-24
PBA Series Vibratory Indoor /Outdoor AC Driven Fire Alarm Bells
24V AC
8" Gong
Terminal Type
PBA-10-24
PBA Series Vibratory Indoor /Outdoor AC Driven Fire Alarm Bells
24V AC
10" Gong
Terminal Type
PBA-6-120 PBA Series Vibratory Indoor /Outdoor AC Driven Fire Alarm Bells
120V AC
6" Gong
Terminal Type
PBA-8-120
PBA Series Vibratory Indoor /Outdoor AC Driven Fire Alarm Bells
120V AC
8" Gong
Terminal Type
PBA-10-120
PBA Series Vibratory Indoor /Outdoor AC Driven Fire Alarm Bells
120V AC
10" Gong
Terminal Type
Amseco
Bells and Strobes
SB624-153075 Bell/Select-A-Strobe Combination
15 or 30 cd Selectable Strobe
24 V DC
6" Gong
SB824-153075
Bell/Select-A-Strobe Combination
15 or 30 cd Selectable Strobe
24 V DC
8" Gong
SB1024-153075
Bell/Select-A-Strobe Combination
15 or 30 cd Selectable Strobe
24 V DC
10" Gong
SB624-75110 Bell/Select-A-Strobe Combination
75 or 110 cd Selectable Strobe
24 V DC
6" Gong
SB824-75110
Bell/Select-A-Strobe Combination
75 or 110 cd Selectable Strobe
24 V DC
8" Gong
SB1024-75110
Bell/Select-A-Strobe Combination
75 or 110 cd Selectable Strobe
24 V DC
10" Gong
RSB24-153075
Select-A-Strobe Retrofit Strobe Bell/Horn Plate
15 or 30 cd Selectable Candela
24 V DC
RSB24-75110
Select-A-Strobe Retrofit Strobe Bell/Horn Plate
75 or 110 cd Selectable Candela
24 V DC
Amseco
Bell Boxes
ABB-1012
Slim line Rugged Outdoor Bell Box
68mA at 12 V DC
4 bolt, 18-gauge cold rolled steel
ABB-1014
Slim line Rugged Steel Hinged Outdoor Bell and Box
68mA at 12V DC
10" Motor Bell
ABB-1033
Motor Bell and Box
Motor driven low current bell MBA-10G
68 mA at 12V DC
10" Motor Bell
Amseco Burglar Bells
MBA-10G12PV2
Burglar Bells 12V DC
Aluminum gong, motor-driven bell
Draws 68mA at 12V DC
Gray finished gong
Amseco Hatch Alarms
HR-300 Hatch Alarm
Operates on 12V DC, 1.0 Amp
80ft. Range
Wireless Stand Alone Alarm
Amseco
Piezo Sounders
PAL-328
Piezo-A-Lert without Nut
Operates on 3~28V DC
Lead Wire Type
PAL-328N
Piezo-A-Lert with Nut
Operates on 3~28V DC
Fits a 1/2" Mounting Hole
ESZ-25S
Continuous Single Tone
Operates on 3~28V DC
2-Lead Wire Type
ESZ-25B
Steady and Pulsating Tones
Operates on 3~28V DC
3-Lead Wire Type
ESZ-26B
Dual Tone
Operates on 3~28V DC
3-Terminal Wire Type
Amseco
Siren and Siren/Strobe Combinations
PAL-328
Piezo-A-Lert without Nut
Operates on 3~28V DC
Lead Wire Type
PAL-328N
Piezo-A-Lert with Nut
Operates on 3~28V DC
Fits a 1/2" Mounting Hole
ESZ-25S Continuous
Single Tone
Operates on 3~28V DC
2-Lead Wire Type
ESZ-25B
Steady and Pulsating Tones
Operates on 3~28V DC
3-Lead Wire Type
ESZ-26B
Dual Tone
Operates on 3~28V DC
3-Terminal Wire Type
Horn and Horn/Strobe Combinations
SHX-51
Armored Horn Speaker
Indoor/Outdoor Aluminum Die-cast Housing
Dual Tamper Protection
SHX-51S
Armored Horn Speaker and Strobe Combination
60,000 Candle Power Strobe
12V DC Strobe
SHX-81
25 Watt Armored Speaker
Indoor/Outdoor Aluminum Die-cast Housing
Dual Tamper Protection
SH-4
Indoor Flat Alarm Speaker
Rated Power 15 watts 8 ohms
Tamper Switch Required PSW-1 Optional
FHS-2
Outdoor Self-Contained Speaker
Rated Power 20 watts
Wall or Ceiling Mount
FHS-3
Surface Mount Self-Contained Speaker
Rated Power 20 watts
Wall Mounted Flat Speaker
Siren Driver
VSD-208 Voice Siren Driver
32 Different Selectable Modes
8-Distinctive Sound Options
Sensors
EBP-1500 Infrared Photoelectric System
Pulsed Infrared Beam
Indoor Use Only
GSC-20N
Glass Shock Piezo Electric Sensor
1-Second Latch Time on Alarm
Moisture Proof
AFS-100B
Fence Sensor 24" PVC Cable
AFS-101B
Fence Sensor 24" Stainless Steel Armored Cable
OFL-331C
Float Switch
Fluid Level Sensor
Foil Blocks
AFB-174
Foil Block
Patented 10-Piece Break-Off Set
Transformers
XF-1220
12V AC 20VA (watts) Output Replacement
Transformer for Door
Announcers/Traffic Counters(Except EBP-405)
CSA Approved
Output Voltage: 12V AC
Output Current: 1.66 Amps
XT-1220
12V AC 20VA (watts) Output
Output Voltage: 12V AC
Output Current: 1.66 Amps
Door Cords
ADC-412
4-Conductor 12" Cord PVC Jacketed
ADC-418
4-Conductor 18" Cord PVC Jacketed
NDC-212
2-Conductor 12" Cord PVC Jacketed
NDC-218
2-Conductor 18" Cord PVC Jacketed
NRC-11
2-Conductor 11" Retractable Door Cord
NRC-22
2-Conductor 22" Retractable Door Cord
QDC-2
2-Conductor 21" Quick Disconnect Cord
RDC-9
2-Conductor Door Cord
RDC-36
2-Conductor Retractable Door Cord
Amseco Magnetic Contacts
Surface Mounts
AMS-7
Micro-Micro Surface / Press-Fit Contact (N/C Loop)3/4" Operating Gap
Surface Mount or 1/4" Press-Fit
N/C Loop
AMS-7D
Micro-Micro Surface / Press-Fit Contact (N/O Loop)
3/4" Operating Gap
Surface Mount or 1/4" Press-Fit
N/O Loop
AMS-9
Micro Mini Contact (N/C Loop)
1/2" Operating Gap
Self-Adhesive and Screw Mount
AMS-10C
Mini Contact with Center Leads and Snap-Off Tabs(N/C Loop)
3/4" Operating Gap
Self-Adhesive and Screw Mount
Center Leads
AMS-10S
Mini Contact with Side Leads and Snap-Off Tabs (N/C Loop) 3/4" Operating Gap
Self-Adhesive and Screw Mount
Side Leads
AMS-T10C
Mini Contact with Terminals and Snap-Off Tabs (N/C Loop)
3/4" Operating Gap
Self-Adhesive and Nail Mount
Center Terminals
AMS-37
Industrial Mag Contact (N/C Loop)
2" Operating Gap
Use with ODC-56 and ODC-59
AMS-37B
Industrial Mag Contact (N/C, N/O Loop)
2" Operating Gap
AMS-37L
Industrial Magnetic Contact (N/C Loop)
2" Operating Gap
24" PVC Jacketed Leads, AWG #22
AMS-37LG48
Industrial Contact (N/C Loop)
48" PVC Jacketed Leads, AWG #22
AMS-39
Standard Surface Contact (N/C Loop)
5/8" Operating Gap
Magnetic Type: Alnico 5
AMS-39B
Standard Surface Contact (N/C, N/O Loop)
3/4" Operating Gap
Magnetic Type: Ferrite Magnet
AMS-39CVS
5-Sets Per Pack Surface Contact (N/C Loop) with Screws, Covers, and
Spacers
3/4" Operating Gap
Magnetic Type: Ferrite Magnet
AMS-47
Industrial Mag Contact (N/C Loop)
2" Operating Gap
Magnetic Type: Alnico 5
Use with ODC-49 and ODC-51 Overhead Contacts
AMS-51CV
Quick Connect Magnetic Contact with Covers (N/C Loop) 1" Operating Gap
Magnetic Type: Alnico 5XT-1240
12V AC 40VA (watts) Output
Output Voltage: 12V AC
Output Current: 3.33 Amps
XT-1620
16.5V AC 20VA (watts) Output
Output Voltage: 16.5V AC
Output Current: 1.21 Amps
XT-1640
16.5V AC 40VA (watts) Output
Output Voltage: 16.5V AC
Output Current: 2.42 Amps
XT-1820
18V AC 20VA (watts) Output
Output Voltage: 18V AC
Output Current: 1.11 Amps
XT-1840
18V AC 40VA (watts) Output
Output Voltage: 18V AC
Output Current: 2.22 Amps
XT-2420
24V AC 20VA (watts) Output
Output Voltage: 24V AC
Output Current: 0.833 Amps
XT-2440
24V AC 40VA (watts) Output
Output Voltage: 24V AC
Output Current: 1.66 Amps
XR-1240LED
12V AC 40VA (watts) Output with LED
Input Voltage: 117V AC
Output Voltage: 12V AC
Output Current: 3.33 Amps
XR-1250LED
12V AC 50VA (watts) Output with LED
Input Voltage: 117V AC
Output Voltage: 12V AC
Output Current: 4.17 Amps
XR-1650LED
16.5V AC 50VA (watts) Output with LED
Input Voltage: 117V AC
Output Voltage: 16.5V AC
Output Current: 3.03 Amps
XR-1840LED
18V AC 40VA (watts) Output with LED
Input Voltage: 117V AC
Output Voltage: 24V AC
Output Current: 1.66 Amps
XR-2440LED
24V AC 40VA (watts) Output with LED
Input Voltage: 117V AC
Output Voltage: 24V AC
Output Current: 1.66 Amps
XR-1850LED
18V AC 50VA (watts) Output with LED
Input Voltage: 117V AC
Output Voltage: 18V AC
Output Current: 2.78 Amps
XR-2450LED
24V AC 50VA (watts) Output with LED
Input Voltage: 117V AC
Output Voltage: 18V AC
Output Current: 2.08 Amps
XF-1250
12V AC 50VA (watts) Output
Output Voltage: 12V AC
Output Current: 4.17 Amps
XF-1650
16.5V AC 50VA (watts) Output
Output Voltage: 16.5V AC
Output Current: 3.03 Amps
XF-1850
18V AC 50VA (watts) Output
Output Voltage: 18V AC
Output Current: 2.78 Amps
XF-2450
24V AC 50VA (watts) Output
Output Voltage: 24V AC
Output Current: 2.08 Amps
AVC-351XF
Transformer Only
AVC-300 Series Transformer
Rated power 17V DC 1.0A
XP-1416
Transformer Only
Input rated power 117V AC
Output rated power 14V DC 1.6A
Amseco Vehicle Alarms
MSR-1AXT
Shadow Voice Siren Alarm
Designed for MSR Series Alarms
MSR-10VXT
Wireless Auto Alarm with Voice
Designed for MSR Series Alarms
Designed with a unique engine running discriminator Operates on 12VDC
WSH-1
Wireless Interface Shock Sensor
Designed for MSR Series Alarms
Designed to protect openings and add additional
security
Operates on 12V DC
WSS-1
Remote Control for the MSR Series Alarms
TXM-1
2-Buttons Transmitter
WHDL-1
Door Lock/Unlock Wire Harness
Dual Sockets with Heavy Duty Wires for Wiring
Electric Doors
WHSID-1
Parking Lights, Starter Interrupt, Trunk Release Applications
Single Socket with Heavy Duty Wires
RLY-1 S.P.D.T
12V DC 20/30 Amp relay
Single Pole Double Throw (S.P.D.T)
Amseco Strobes
SL-401
Strobe 60,000 Candle Power Output
Operates on 12V DC
115 mA Current Draw
Available in Amber, Blue, Green, Green and Clear color lens
SL Lens Only for SL-401
Available in Amber, Blue, Green, Green and Clear color lens
SL-5(12&24)
Conical Strobe Lights
160,000 Candle Power
Operates on 12/24 V DC
Available in Amber, Blue, Green, Green and Clear color lens
SLL-G
Conical Strobe Lights for SL-5
Lens Only
Available in Amber, Blue, Green, Green and Clear color lens
Door Cords
ADC-412
4-Conductor 12" Cord PVC Jacketed
ADC-418
4-Conductor 18" Cord PVC Jacketed
NDC-212
2-Conductor 12" Cord PVC Jacketed
NDC-218
2-Conductor 18" Cord PVC Jacketed
NRC-11
2-Conductor 11" Retractable Door Cord
NRC-22
2-Conductor 22" Retractable Door Cord
QDC-2
2-Conductor 21" Quick Disconnect Cord
RDC-9
2-Conductor Door Cord
RDC-36
2-Conductor Retractable Door Cord
Amseco Magnetic Contacts
Surface Mount
AMS-7
Micro-Micro Surface / Press-Fit Contact (N/C Loop)3/4" Operating Gap
Surface Mount or 1/4" Press-Fit
N/C Loop
AMS-7D
Micro-Micro Surface / Press-Fit Contact (N/O Loop)3/4" Operating Gap
Surface Mount or 1/4" Press-Fit
N/O Loop
AMS-9
Micro Mini Contact (N/C Loop)
1/2" Operating Gap
Self-Adhesive and Screw Mount
AMS-10C
Mini Contact with Center Leads and Snap-Off Tabs (N/C Loop)
3/4" Operating Gap
Self-Adhesive and Screw Mount
Center Leads
AMS-10S
Mini Contact with Side Leads and Snap-Off Tabs (N/C Loop)
3/4" Operating Gap
Self-Adhesive and Screw Mount
Side Leads
AMS-T10C
Mini Contact with Terminals and Snap-Off Tabs (N/C Loop)
3/4" Operating Gap
Self-Adhesive and Nail Mount
Center Terminals
AMS-37
Industrial Mag Contact (N/C Loop)
2" Operating Gap
Use with ODC-56 and ODC-59
AMS-37B
Industrial Mag Contact (N/C, N/O Loop)
2" Operating Gap
AMS-37L
Industrial Magnetic Contact (N/C Loop)
2" Operating Gap
24" PVC Jacketed Leads, AWG #22
AMS-37LG48
Industrial Contact (N/C Loop)
48" PVC Jacketed Leads, AWG #22
AMS-39
Standard Surface Contact (N/C Loop)
5/8" Operating Gap
Magnetic Type: Alnico 5
AMS-39B
Standard Surface Contact (N/C, N/O Loop)
3/4" Operating Gap
Magnetic Type: Ferrite Magnet
AMS-39CVS
5-Sets Per Pack Surface Contact (N/C Loop) with Screws, Covers, and
Spacers
3/4" Operating Gap
Magnetic Type: Ferrite Magnet
AMS-47
Industrial Mag Contact (N/C Loop)
2" Operating Gap
Magnetic Type: Alnico 5
Use with ODC-49 and ODC-51 Overhead Contacts
AMS-51CV
Quick Connect Magnetic Contact with Covers (N/C Loop)
1" Operating Gap
Magnetic Type: Alnico 5
Recess Mounts
AMS-17
3/8" Press Fit Mini Contact (N/C Loop)
5/16" Operating Gap
Magnetic Type: Alnico 5
12" Leads, AWG #22
AMS-T17
3/8" Press Fit Terminal Type Mini Contact (N/C Loop)5/16" Operating Gap
Magnetic Type: Alnico 5
Screw Terminals
AMS-20
1/4" Press Fit Mini Contact (N/C Loop)
5/8" Operating Gap
Magnetic Type: Alnico 5
24" Leads, AWG #22
AMS-21
3/8" Press Fit Recessed Contact (N/C Loop)
5/8" Operating Gap
Magnetic Type: Alnico 5
N/C Loop
AMS-21D
3/8" Press Fit Recessed Contact (N/O Loop)
5/8" Operating Gap
Magnetic Type: Alnico 5
N/O Loop
AMS-T21
3/8" Press Fit Terminal Type Contact (N/C Loop)
5/8" Operating Gap
Magnetic Type: Alnico 5
Screw Terminals
Mechanical Contact
AMS-38B
Mechanical Contact (N/C, N/O Loop)
5/8" Operating Gap
Magnetic Type: Alnico 5
AC Rating: 300V 3 Amps
Steel Door Switches
AMS-25A
3/4" Press Fit Steel Door Contact (N/C Loop)
3/4" Operating Gap
Magnetic Type: Alnico 5
N/C Loop
AMS-25B
3/4" Press Fit Steel Door Contact (N/C, N/O Loop)
3/4" Operating Gap
Magnetic Type: Alnico 5
N/O Loop
AMS-26A
3/4" Press Fit Steel Door Contact (N/C Loop)
1-1/4" Operating Gap
Magnetic Type: Alnico 5
N/C Loop
AMS-26B
3/4" Press Fit Steel Door Contact (N/C, N/O Loop)
1-1/4" Operating Gap
Magnetic Type: Alnico 5
N/C, N/O Loop
Roller Ball Switches
RSW-21A
3/4" Press Fit Roller Ball Switch (N/C Loop)
RSW-21B
3/4" Press Fit Roller Ball Switch (N/C, N/O Loop)
RSW-21S
Spacer for RSW-21 Series
Plunger Switches
PSW-1
Reed Plunger (N/C Loop)
25" Leads, AWG #22
PSW-1H
Adaptor Housing
Use with PSW-1 Plunger
PSW-2
Reed Plunger (N/C, N/O Loop)
25" Leads, AWG #22
2 Reed Switches in One Housing
PSW-21
3/8" Press Fit Plunger Switch (N/C Loop)
25" Leads, AWG #22
Operating Force 100~200g
PSW-22
3/8" Press Fit Plunger with Plunge (N/C Loop)
25" Leads, AWG #22
TSW-2T
Mechanical Tamper Switch (N/C Loop)
0.2" Pre-travel Stroke
Pull Apart Contacts
AMPS-10A
Pull-Apart Surface Mount Contact (N/C Loop)
AMPS-10B
Pull-Apart Surface Mount Contact (N/C, N/O Loop)
AMPS-21A
Pull-Apart Recessed Mount Contact (N/C Loop)
AMPS-21B
Pull-Apart Recessed Mount Contact (N/C, N/O Loop)
AMPS-33
Pull-Apart-Base Surface Mount Contact (N/C Loop)
Hold-Up Switches
HUSD-15BM
Momentary Type, Double Hold-Up Switch S.P.D.T (N/O, N/C Loop)
Hidden Mounting Screws
125V AC 5 Amps, 30V DC 5 Amps
HUSD-15BL
Latching Type, Double Hold-Up Switch S.P.D.T (N/O, N/C Loop)
Hidden Reset Button and Mounting Screws
125V AC 0.5 Amps, 30V DC 1 Amps
HUS-1
Hold-Up Switch Tool Resettable S.P.D.T (N/O, N/C Loop)
· Status Window Alarm Indicator Red/Blue
· 125V AC 5 Amps, 30V DC 5 Amps
HUS-B2 Hold-Up Mini Switch Tool Resettable D.P.D.T (N/O, N/C Loop)
· Activation/Reset in One Push Button
· 125V AC 5 Amps, 30V DC 5 Amps
HUS-7A Hold-Up Switch Tool Resettable S.P.D.T (N/O, N/C Loop)
· Large Round Push Button
· 125V AC 5 Amps, 30V DC 5 Amps
HUS-5B2 Hold-Up Switch Tool Resettable (N/O, N/C Loop)
· Large Square Push Button
· 24" Leads
· 125V AC 5 Amps, 30V DC 5 Amps
HUSK-10 Hold-Up Key Resettable Switch S.P.D.T (N/O, N/C Loop)
· Status Window Alarm Indicator Red/Blue
· 125V AC 5 Amps, 30V DC 5 Amps
HUS-K Resettable Tool for HUS-1
HUS-5K Resettable Tool for HUS-5B2 and HUS-7A
HUSK-K Resettable Key for HUSK-10
Overhead Contacts
ODC-49A
Mini Overhead Door Contacts (N/C Loop)
· 2" Operating Gap
· Low Profile Switch Enclosed in Die-Cast Housing
ODC-51A Mini Storage Overhead Door Contacts (N/C Loop)
· 2" Operating Gap
· N/C Loop
ODC-51B
Mini Storage Overhead Door Contacts (N/O, N/C Loop)
· 2" Operating Gap
· N/O Loop
ODC-56A Overhead Door Contacts (N/C Loop)
· 2" Operating Gap
· N/C Loop
ODC-59A Overhead Door Contacts (N/C Loop)
· 2" Operating Gap
· N/C Loop
ODC-59B Overhead Door Contacts (N/O, N/C Loop)
· 2" Operating Gap
· N/O, N/C Loop
ODC-59A36 Overhead Door Contacts (N/C Loop)
· 2" Operating Gap
· N/C Loop
Emergency Switches
AES-1 Emergency Push Button Switch (N/O Loop)
ESW-1A Emergency Button Switch with Retractable Cord (N/O S.P.S.T)
ESW-1B Emergency Button Switch with Retractable Cord (N/C S.P.S.T)
ESW-1C Emergency Button Switch with Retractable Cord (N/C, N/O S.P.D.T)
ESW-2A Emergency Button Switch with Straight Cord (N/O S.P.S.T)
ESW-2B Emergency Button Switch with Straight Cord (N/C S.P.S.T)
ESW-2C Emergency Button Switch with Straight Cord (N/C, N/O S.P.D.T)
ESWH-1 Housing for Surface Mounting ESW Series Emergency Button Switches
Money Clip
AMC-2 Money Clip (N/O, N/C Loop)
· Fits Standard Cash Register Drawers
High Security Switches
BMC-33B Anti-Defeat Double Bias Contact (N/O, N/C Loop)
· 24" stainless Steel armored cable
· Anodized aluminum housing
·360 degree mounting capabilities
Hardwares
ADBZ-1 Z-Bracket
· Use for BMC-33, 37, 38 and 39 Series,All Surface Mount Contacts and Magnets
27-111L
L-Bracket
· Use for ODC-59 and AMS-37 Series Contacts and Magnets
· Fits BMC-33 Series Contacts
27-112L L-Bracket
· Use for ADM, AWS Series Contacts
27-301C Protective C-Bracket
· Use for BMC-33, AWS-37 Series Contacts
27-51L L-Bracket
· Use for ODC-51 Series Contacts
505-372G111L L-Bracket
· Use for AMS-37 Magnet
AMS-8C Terminal Cover
· Use with AMS-38 and AMS-39
AMS-21P 3/8" Pre-Wire Plug
AMS-37H Case Spacer
· Use with AMS-37 Magnetic Contact
AMS-37S Flat Spacer
· Use with AMS-37
AMS-38S Flat Spacer
· Use with AMS-38 and AMS-39
AMS-50SM AMS-51CV Switch and Magnet Spacer
· Use with AMS-50
AMS-50SS AMS-50 Switch Spacer
|
